Fullerton, CA · Walk-ins Welcome
A charging port takes more mechanical abuse than any other connector on a device. Pocket lint packs into it, pins bend, and solder joints fatigue after years of plugging in.
Not every charging fault needs a new port. We inspect first, because a packed port and a broken port look identical from the outside.
We do not publish repair prices. A technician confirms your exact price by text and email before any work starts.
Trained repair technicians
Including a certified advanced repair technician
Warranty varies by repair
Coverage confirmed with your quote
Same-day on many repairs
Depending on parts and device condition
No surprise pricing
Your exact price texted before we start
Inspection under magnification
We look at pin condition, contamination and any corrosion or heat marks around the connector.
Cleaning where that is the fix
If compacted debris is the cause, careful cleaning often restores a solid connection without any parts.
Port replacement where needed
On devices with a flex-mounted port, the assembly is replaced. On soldered ports, the connector is removed and a new one fitted at the board.
Charge and data testing
We verify charge rate, cable retention and data connection before returning the device.
We do not assume every charging problem is a broken port. Some are debris, some are a worn cable, some are a charging circuit fault on the board — the inspection tells us which.
Cleaning is usually done while you wait. Flex-mounted port replacements are often same day; soldered ports are board-level work and take longer.
Small-part charging port replacements carry a one-year warranty. When the fix is board-level, the shorter board-level term applies instead — we confirm which with your quote.
Warranty varies by repair and part quality and is confirmed with your quote. See the full warranty policy.
It often is. Bring the cable you use and we will test the device with a known-good cable and charger as part of the inspection.
Gentle removal of loose lint with a wooden or plastic pick is low risk. Metal tools and compressed air can bend pins or push debris further in, which turns a cleaning job into a replacement.
On many devices the port is soldered directly to the logic board, and the pads under it can be damaged. That requires micro-soldering rather than a plug-in part swap.
Yes — Switch, controller and other console ports are repaired at the shop, and we tell you up front when a case needs board-level work.
Battery Replacement
Fast drain, random shutdowns, overheating and swelling on phones, tablets and laptops.
Learn MoreBoard-Level Repair
Micro-soldering and logic-board diagnosis for no-power, charging IC and connector faults.
Learn MoreWater Damage Repair
Liquid spills and submersion on phones, tablets, laptops and consoles — cleaning and corrosion work.
Learn MoreOne shop, one bench in Fullerton. This is an in-shop repair service — we do not offer mobile or mail-in repairs. Most customers are about 10 minutes away and repairs are done the same day while they wait.
Fullerton, CA
Our shop — walk in on W Chapman Ave
Anaheim, CA
About 10 minutes from central Anaheim
Buena Park, CA
About 10 minutes down Beach Blvd
Brea, CA
About 10 minutes south on Harbor Blvd
La Habra, CA
About 10 minutes east on Whittier Blvd
Yorba Linda, CA
About 15 minutes west on Imperial Hwy
Not sure if we cover you? Call or text (714) 805-9745 and we'll tell you straight.
137 W Chapman Ave Suite C, Fullerton, CA 92832
Mon–Sat 9am–8pm · Sun 9am–6pm